进口法兰式针型阀性能参数  Performance parameter角式针型阀1.jpg

法兰式针型阀垂直升降式而非旋转升降式阀杆设计，避免阀门密封副间相对旋转产生刮伤及减少密封填料的磨损，有效地提高了阀门及填料的使用寿命，间歇式填料系统设计，有效地减少填料的冷流及阀门的操作力矩，同时可利用系统介质对填料的作用实现更好的密封 RETZ The flange needle valve is designed as a vertical lifting valve stem instead of a rotary lifting valve stem to avoid scratches caused by the relative rotation of the valve sealing pairs and reduce the wear of the sealing packing, effectively improving the service life of the valve and the packing. The intermittent packing system is designed to effectively reduce the cold flow of the packing and the operating torque of the valve. At the same time, the effect of the system medium on the packing can be used to achieve better sealing

结构：直通式，直角式 Structure: straight through type, right angle type

特征：锥面、球面密封,活动阀瓣 Conical, spherical seal, movable valve disc

功       能：截断和节流 Function: truncation and throttling

标准 Standard∶ ANSI B16.34 ASME  

工作压力 Working Pressure∶150-2500LB/216bar-420bar

额定温度Temperature Rating∶-40～232℃～450℃

材料:304SS,304L,316SS,316L,316H,321,A105

规格尺寸:1/4＂－2＂

进口法兰式针型阀结构特征 structure characteristics

设计符合ASME VIII，ANSI B16.34/B16.5B31.3 和API6D的相关要求  The product design shall conform to ASME VIII, ANSI B16.34/B16.5B31.3 and API6D陶瓷芯针型阀3.jpg

不旋转阀芯，以确保压力关闭的紧密性，不旋转阀杆承受超高压和超高温 Do not rotate the valve element to ensure the tightness of pressure closing. Do not rotate the valve stem to withstand ultra-high pressure and ultra-high temperature

阀体特殊的加强设计确保压力密封可靠性更高 Special reinforced design of valve body ensures higher reliability of pressure seal

填料位于阀杆的下方，以隔绝螺纹与介质的接触 The packing is located below the valve stem to isolate the contact between the thread and the medium

阀杆螺纹为滚压制减少磨损长 The valve rod thread is rolled to reduce wear

手柄大大减少操作扭矩 The handle greatly reduces the operating torque

阀杆和填料函接头和阀体是相扣设计，防止阀杆脱离阀门 The joint between the valve stem and stuffing box and the valve body is designed to be interlocked to prevent the valve stem from leaving the valve

直通法兰式针型阀 Straight flange needle valve

角式法兰式针型阀 Angle flange needle valve