(氧化铝,碳化硅)气动内螺纹陶瓷球阀
简要描述:RETZ (氧化铝,碳化硅)进口气动内螺纹陶瓷球阀已使用在以下介质流体领域空气、臭氧、油、海水、盐水、泳池水(工业电镀印刷)废水、污水、漂白水、双氧水、工业洗衣液、消毒液次氯酸钠、乙醇、碳酸氢钠、氢氧化钠、盐酸、硫酸、硝酸、磷酸
- 品牌:RETZ
- 工况条件:开/关
- 温度/压力:P-T: 16bar@180℃
- 更新时间:2022/11/23
(氧化铝,碳化硅)进口气动内螺纹陶瓷球阀其核心部件阀芯与阀座采用性能优良的刚玉陶瓷或碳化硅陶瓷,经1680℃或2200℃超高温烧结而成,洛氏硬度HRA高达85°以上,经平面磨、外圆磨、快速球磨、球面对研等工序精密加工,确保球芯圆度达到6μm以下,阀芯与几乎完全贴合的阀座相对旋转实现启闭,轻扭矩得以精妙展现 RETZ (Aluminum oxide, silicon carbide) imported pneumatic internal thread ceramic ball valve. Its core parts, valve core and valve seat, are made of corundum ceramics or silicon carbide ceramics with excellent performance. They are sintered at 1680 ℃ or 2200 ℃ at ultra-high temperature. The Rockwell hardness HRA is above 85 °. The roundness of the ball core can be ensured to reach 6 by precision processing such as surface grinding, external circular grinding, rapid ball grinding, ball surface grinding, etc μ Below m, the valve core and the valve seat that almost fit together rotate relatively to realize opening and closing, and the light torque is subtly displayed
性能参数 Performance description
公称通径 DN(mm) | G1/2-3” 缩径球阀(14.5-58mm) |
结构 | 浮动球直通(硬密封球阀),球芯:氧化铝陶瓷芯,碳化硅阀芯 |
公称压力 | 0-16Bar |
连接形式 | 螺纹式(G) |
阀体材质 | 316L不锈钢 |
阀杆材料 | 默认316L ,可选(哈式合金钢B或哈式C) |
工作温度 | 0- 120°C,选择(三元乙丙橡胶:EPDM),0-200°C,选择(氟橡胶密封:FKM) |
动作范围 | 0~90° |
泄露量Q | 按GB/T4213-92,小于额定KV0.01% |
基本误差 | 带定位器:小于全行程的±2% |
可调范围 | 250:1 |
配置执行机构 | AT系列单双作用气动执行器 |
控制方式 | 开关两位控制能、4~20mA模拟量信号控制 |
(氧化铝,碳化硅)进口气动内螺纹陶瓷球阀 球芯使用工程陶瓷The ball core adopt engineering ceramic
产品特性 Product characteristics
氧化铝陶瓷芯特点Alumina ceramic core features
陶瓷球芯经1680℃超高温烧结而成 The ceramic ball core is sintered at 1680℃
采用刚玉陶瓷,ALO含量≥95% Adopt corundum ceramics, Al Ogcontent ≥95%
陶瓷球硬度HRA≥85° Ceramic ball hardness HRA≥85°
耐酸碱性∶常温下对各种无机酸、碱稳定 Acid and alkali resistance: stable to various inorganic acids and alkalis at room temperature
碳化硅阀芯特点Silicon carbide core features
质量轻、高硬度、耐磨损:碳化硅球芯经2200℃以上超高温烧结而成,硬度≥HRA90 Light weight, high hardness and wear resistance: silicon carbide ball core is sintered at super high temperature above 2200 ℃, hardness ≥ HRA90
耐高温:在1500℃的高温环境下也不会反应◎化学稳定性好,耐酸碱腐蚀性优良在HF酸或5mol/L HNO3中依然保持稳定 High temperature resistance: it will not react under the high temperature environment of 1500 ℃ ◎ Good chemical stability, good acid and alkali corrosion resistance, stable in HF acid or 5mol/L HNO3
具有优异的导热性,热膨胀性低:在急冷急热的环境下不易崩裂 It has excellent thermal conductivity and low thermal expansion: it is not easy to crack in a hot and cold environment
低摩擦系数:具有优良的干润滑性,启闭更轻松 Low friction coefficient: excellent dry lubrication, easier to open and close
应用场合 Application occasions