产品用途 Product use

1..适用于联结空间同一平面上两轴夹角每节极限转动角度为45度，允许使用角度30度以内 Applicable to the included angle of two shafts on the same plane of the connecting space. The limit rotation angle of each section is 45 degrees, and the allowable angle is within 30 degrees

2.所提供的快速锁紧装置仅有公差为H7的成品孔，带标准的键槽或六角孔可选，可非标定制不同安装结构 The provided quick locking device only has finished hole with tolerance of H7, with standard keyway or hexagonal hole optional, and different installation structures can be customized non-standard

3.结构简单,关节可拆卸,易维护,传动效率高 Simple structure, detachable joint, easy maintenance, high transmission efficiency

4.可伸缩,连接更大的轴间距 Scalable, connecting with larger axle spacing

5.关节精密配合，间隙小 Joint precision fit, small clearance

6.噪音小，使用寿命长 Low noise, long service life

结构特点 Structural features

1.使用两轴不同一轴线，存在轴线夹角的情况下能实现所联接的两轴连续回传，并可靠的传递转矩运动，具有较大的角度补偿能力最大30度夹角下使用 When two axes are different from one axis and there is an included angle between the axes, it can realize the continuous transmission of the two connected axes, and reliably transmit the torque movement. It has a large angle compensation ability and can be used at the maximum included angle of 30 degrees

2.结构简单关节可以拆卸，可伸缩易与维护传动效率高，成品孔H7可根据要求，开键槽，销孔，六方孔和四方孔 The structure is simple, the joint can be disassembled, the expansion is easy, and the maintenance and transmission efficiency is high. The finished hole H7 can be provided with keyway, pin hole, hexagonal hole and square hole according to the requirements

3.材质可做304不锈钢 表面常规发黑，可按照要求镀镍镀锌磨光 The material can be made of 304 stainless steel, and the surface can be blackened regularly, and can be polished by nickel plating and zinc plating as required

基本参数和尺寸 Basic parameters and dimensions