内螺纹零压差电磁阀
简要描述:RETZ进口内螺纹黄铜、不锈钢零压差电磁阀是一种分步直动式电磁阀,弹簧耦合结构,PTFE组合膜片,更坚固耐用·适用多种流体介质
品牌:RETZ
工况条件:零压差启动
温度/压力:P-T: 0-10bar@120℃
更新时间:2023/04/07
技术参数 Technical parameter
零压差电磁阀实际上就是一种分步直动式电磁阀,结构合理,动作可靠,在零压力差时工作也可靠,适用于真空系统
The zero pressure difference solenoid valve is actually a step-by-step direct acting solenoid valve, with a reasonable structure, reliable action, and reliable operation even at zero pressure difference. It is suitable for vacuum systems
二位二通常闭电磁阀,断电关闭,通电打开 Two position two normally closed solenoid valve, power off to close, power on to open
二位二通常开型电磁阀,断电打开,通电关闭 Two position two normally open solenoid valve, power off to open, power on to close
动作类型 | 分步直动式(零压差) |
控制方式 | 常闭式(标准)、常开式(可选) |
连接口 | G(标准)、NPT(可选) |
适用介质 | 中性介质,气态或液态流体 |
流体黏度 | ≤21mm²/s |
阀体材质 | 黄铜、不锈钢SS304、SS316 |
膜片、密封 | NBR、VITON、EPDM(可选) |
介质温度 | NBR:-10~+80℃ FKM:-10~+110℃ EPDM:-20~+120℃ |
环境温度 | -0~65℃(防爆型-20℃~40℃) |
标准电压 | AC220V/230V/240V/10V/24V50/60HZDC24V/12V |
电压变化 | ±10% |
防护等级 | IP65 |
安装方式 | 可任意安装,为增强使用寿命,最好使线圈朝上,水平安装 |
规格尺寸 | 1/4-2” |
适用压力 | 0-10Bar |
工作原理 working principle
有常闭和常开型二种 There are two types: normally closed and normally open
常闭型:采用一次开阀和二次开阀集于一体的形式,主阀和导阀分步有电磁力和压力差作用来直接开启主阀口。当线圈通电时,产生电磁力使动铁芯和静铁芯吸合,导阀口开启,而导阀口设在主阀口上,动铁芯与主阀芯连在一起,此时主阀上腔的压力通过导阀口卸荷,在压力差和电磁力的同时作用下,使用主阀芯向上运动,开启主阀口,介质流通。当线圈断电时电磁力消失,此时动铁芯在自重和弹簧力的作用下关闭导阀孔,介质在平衡孔中进入主阀上腔,使上腔压力升高,此时在弹簧复位和压力作用下关闭主阀口,介质断流。
Normally closed type: Adopting a combination of primary and secondary opening valves, the main valve and pilot valve have electromagnetic force and pressure difference in steps to directly open the main valve port. When the coil is energized, electromagnetic force is generated to cause the moving iron core and the static iron core to engage, and the pilot valve port is opened. The pilot valve port is located on the main valve port, and the moving iron core is connected to the main valve core. At this time, the pressure in the upper chamber of the main valve is unloaded through the pilot valve port. Under the simultaneous action of pressure difference and electromagnetic force, the main valve core is moved upwards, opening the main valve port, and the medium flows. When the coil loses power, the electromagnetic force disappears. At this time, the moving iron core closes the pilot valve hole under the action of its own weight and spring force, and the medium enters the upper chamber of the main valve in the balance hole, causing the pressure in the upper chamber to increase. At this time, the main valve port is closed under the action of spring reset and pressure, and the medium is cut off
常开型:与常闭型正好相反 Normally open type: exactly opposite to normally closed type