(耐酸碱，耐腐蚀)衬氟旋塞阀启闭迅速、流体阻力小。由于旋塞阀密封面之间运动带有擦拭作用，而在全开时可完全防止与流动介质的接触，故它通常也能用于带悬浮颗粒的介质retz品牌  (Acid and alkali resistant, corrosion resistant) Fluorine lined plug valve can be opened and closed quickly with small fluid resistance. Since the movement between the sealing surfaces of the plug valve has the function of wiping and can completely prevent the contact with the flowing medium when it is fully opened, it can also be used for the medium with suspended particles

(耐酸碱，耐腐蚀)进口衬氟旋塞阀技术规范 Technical specifications

衬氟三通旋塞阀是关闭件为柱塞形的旋转阀，通过旋转90度使阀塞上的通道口与阀体上的通道口相同或分开，实现开启或关闭的一种阀门。适用于切断和接通以及分流介质，适应多通道结构以致一个阀可以获得两个、三个，甚至四个不同的流道。这样可以简化管道系统的设计、减少阀门用量retz品牌  Fluorine lined three-way plug valve is a kind of rotary valve with plunger closure, which can be opened or closed by rotating 90 degrees to make the channel port on the plug the same or separate from the channel port on the valve body. It is suitable for cutting off and connecting as well as diverting media, adapting to multi-channel structure so that one valve can obtain two, three, or even four different flow channels. This will simplify the design of the piping system and reduce the use of valves

三通旋塞阀开启流线图  Flow diagram of three-way plug valve opening

流线图1

流线图2

流线图3

(耐酸碱，耐腐蚀)进口衬氟旋塞阀性能特点 Performance characteristics

旋塞与衬里阀体带有锥度设计，当在使用过程中由于磨损而不能密封时，可通过调整阀盖上的调节螺钉使旋塞向下移动，补偿加在密封面的密封力 The cock and lined valve body have taper design. When the valve cannot be sealed due to wear during use, the cock can be moved downward by adjusting the adjusting screw on the valve cover to compensate the sealing force on the sealing surface

顶密封组件组成第二道外密封，在密封面失效的情况下，阻止介质从阀杆向外泄漏 The top seal assembly forms the second external seal to prevent the medium from leaking out of the valve stem when the sealing surface fails

把上阀盖上的四个螺栓打开后，就可以取出阀内所有部件，进行直接更换阀门零件而不需要从管道上取下阀门 After the four bolts on the upper bonnet are opened, all components in the valve can be taken out, and the valve parts can be replaced directly without removing the valve from the pipeline

具有进出口端同时密封的优点，在整个工作过程当中密封 面摩擦系数小，塞体运转灵活，不需要润滑 It has the advantage of simultaneous sealing at the inlet and outlet. During the whole working process, the friction coefficient of the sealing surface is small, and the plug body operates flexibly without lubrication

主要零部件材料 Main parts and materials

口径		DN15-300,1/2"-12"
压力		1.0MPa 1.6MPa 150LB
No.	名称	材料明细
1	内六角螺钉	A193 B7	A320 B8	A193 B8M
2	手柄座	A216 WCB	A351 CF8	A351-CF8M
3	操作杆	25#  SS304
4	外六角螺钉	A193 B7	A320 B8	A193 B8
5	调节螺钉	A193 B7	A320 B8	A193 B8M
6	阀盖	A216 WCB	A351 CF8	A351 CF8M
7	金属压板	SS304
8	V型垫	PTFE
9	轴环	PTFE
10	塞子	A216 WCB +衬里材质	A351 CF8 +衬里材质	A351 CF8M +衬里材质
11	阀体	A216 WCB +衬里材质	A351 CF8 +衬里材质	A351 CF8M +衬里材质