功能原理 Functional principle

(KHP)进口高压板式球阀旋转控制芯轴使球体从开启位置转到关闭位置，系统压力将球体推向密封碗的无压侧并无泄漏地切断液流  retz品牌 (KHP) imported high-pressure plate type ball valve rotates the control spindle to turn the ball from the open position to the closed position, and the system pressure pushes the ball to the non pressure side of the sealing bowl to cut off the liquid flow without leakage

功能示意图 Function Diagram

型号说明 Model description

结构特点 Structural characteristics

通过控制手柄芯轴上的指示槽位观察开关位置 Observe the switch position through the indication slot on the control handle spindle

通过限位销和限位垫限定开关位置 Limit switch position through limit pin and limit pad

无泄漏，不需要手工重调密封件 No leakage, no need to manually readjust the seal

全流量通流便于介质的无阻尼流动 Full flow passage facilitates undamped flow of medium

控制芯轴密封上设有支撑环 The control spindle seal is provided with a support ring

采用浮球式密封原理，在出口侧密封 Adopt the floating ball sealing principle to seal at the outlet side

可提供不锈钢材质球阀 Stainless steel ball valve available

A.阀体  B.螺塞  C.控制芯轴  D.球体  E.定位销  F.限位垫  G.挡圈

A. Valve body B. Screw plug C. Control spindle D. Ball E. Locating pin F. Limit pad G. Retaining ring

外形尺寸 Overall dimensions

注释：球阀不是设计为流量控制阀，因此要么全开要么全闭以免损坏密封 Note: The ball valve is not designed as a flow control valve, so it is either fully open or fully closed to avoid damaging the seal

为确保工作正确，必须满足要求的压力和温度参数 To ensure correct operation, the required pressure and temperature parameters must be met