电动偏心半球阀(调节型,切断型)
简要描述:RETZ进口电动偏心半球阀(调节型,切断型)是一种板绕偏心轴心旋转来控制流体的角行程调节阀。阀芯的回转中心不与旋转轴同心,可减少磨损,阀芯后部设有一个导流翼,有利于流体稳定流动,具有良好的稳定性。其次,流量大,可调范围广等特点
- 品牌:RETZ
- 工况条件:开/关/调节
- 温度/压力:P-T: 40bar@300℃
- 更新时间:2023/02/20
功能介绍 Function introduction
进口电动偏心半球阀(调节型,切断型)采用板簧加载的可动阀座结构,阀座与球体不会产生卡阻或脱离等问题,密封可靠,使用寿命长。电动偏心半球阀V型切口的球芯与金属阀座之间具有剪切作用,特别适用于含纤维、微小固体颗粒及料浆等介质 retz The imported electric eccentric hemispherical valve (regulating type, cut-off type) adopts the moveable valve seat structure loaded with leaf spring. The valve seat and the ball will not be stuck or separated, and the sealing is reliable and the service life is long. There is a shearing action between the ball core of the V-notch of the electric eccentric hemisphere valve and the metal valve seat, which is especially suitable for media containing fiber, small solid particles and slurry
设计特色 Design features
1、解决了工业生产中的浆状、混流液体、灰尘等介质在管道输送中沉淀、易结垢、阻塞,使阀门关不严等问题 Solved the problems of slurry, mixed flow liquid, dust and other media in industrial production, such as sedimentation, scaling and blocking in pipeline transportation, and making the valve not closed tightly
2、开关轻便,开启时球与壳体脱离,无任何接触,启动扭矩小,转动灵活。关闭时,半球与阀座的挤切作用能除去密封面上的污物,使阀门顺利启闭,安全系数高,密封性能好 The switch is light, the ball is separated from the shell during opening without any contact, the starting torque is small, and the rotation is flexible. When the valve is closed, the squeezing and cutting action of the hemisphere and the valve seat can remove the dirt on the sealing surface, so that the valve can be opened and closed smoothly, with high safety factor and good sealing performance
3、密封面的偏心结构,使球面能自动补偿磨损,能保持阀门的密封,使用寿命长 The eccentric structure of the sealing surface enables the spherical surface to automatically compensate for wear, maintain the sealing of the valve, and have a long service life
4、耐磨硬密封偏心半球阀,它的密封副材料是特殊的,密封面要经过特殊耐磨处理。处理后表面硬度可达到HRC65-72度,故阀门的耐磨性能特别好 Wear-resistant hard seal eccentric hemisphere valve, its sealing pair material is special, and the sealing surface shall undergo special wear-resistant treatment. The surface hardness after treatment can reach HRC65-72 degrees, so the wear resistance of the valve is particularly good
基本参数 Basic parameters
主要零件材料 Material of main parts
零件名称 | 材料 | |||
阀体、阀盖 | WCB | 304(CF8) | 316(CF8M) | 316L(CF3M) |
球体 | 2Cr13+氮化处理 | 304 | 316 | 316L |
阀杆 | 2Cr13 | 304 | 316 | 316L |
阀座密封圈 | PTFE、碳素纤维+PTFE、对位聚苯、金属密封 | |||
密封填料 | V型聚四氟乙烯填料、含浸聚四氟乙烯石棉填料、石棉纺织填料、石墨填料 |
主要技术参数及性能 Main technical parameters and performance
公称通径 DN(mm) | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | |
额定流 | 全腔型 | 14 | 25 | 30 | 55 | 100 | 135 | 230 | 320 | 500 | 850 | 1300 | 1750 |
60%腔型 | - | - | - | - | - | - | - | - | 300 | 510 | 780 | 1050 | |
40%腔型 | 6 | 10 | 12 | 20 | 40 | 54 | 92 | 128 | 200 | 340 | 520 | 700 | |
允许压差(MPa) | ≤公称压力 | ||||||||||||
阀体形式 | 整体铸造球形体 | ||||||||||||
阀芯形式 | 偏心旋转阀芯(带导流翼) | ||||||||||||
流量特性 | 近似等百分比 | ||||||||||||
动作范围 | 全开60° | ||||||||||||
泄露量Q | 软密封VI级、硬密封IV级,符合ANSI B16.104标准 | ||||||||||||
基本误差 | ±1% | ||||||||||||
回差 | ±1% | ||||||||||||
死区 | ≤1% | ||||||||||||
可调范围 | 全腔型(100:1)、60%腔型(60:1)、40%腔型(40:1) | ||||||||||||
配置执行机构 | 角行程电动执行机构 | ||||||||||||
控制方式 | 开关到位灯(开关两位控制)、无源触点信号、1/5K电位计、智能调节(4~20mA模拟量信号控制) |
执行器技术参数 Technical parameters of actuator
电源电压 | AC220/380V,50/60Hz |
输出力矩 | HR:50N·M~2000N·M;HQ:50N·M~3000N·M |
动作范围 | 0~90° 0~360° |
动作时间 | 15秒/30秒/60秒 |
保护装置 | 过热保护 |
环境温度 | -30°~60° |
手动操作 | 同附件带手柄、手轮 |
限位 | 电气、机械二重限位 |
防护等级 | 相当于IP-65 |
防爆等级 | ExdII BT4;特殊要求可定制ExdII BT6 |
位置测量 | 可选装开关或电位计 |
驱动电机 | 8W/E |
进线接口 | PE1/2〞进线线锁 |