首页 > 产品中心 > RETZ瑞茨联轴器 > 进口鼓形齿式联轴器 > 接中间套鼓形齿式联轴器(WGT)

接中间套鼓形齿式联轴器(WGT)

简要描述：RETZ进口接中间套鼓形齿式联轴器(WGT)属于鼓形齿式联轴器的一种简称“鼓齿联轴器”，分为I型和II型两种形式，I型为带压盖型，优点在于拆卸压板即可检验、换外齿；II型为不带压盖型

品牌：RETZ
工况条件：联接机械
温度/压力：710-1250000N.m.
更新时间：2023/03/27

联系我们

产品详情 在线咨询

进口带制动盘齿式联轴器(WGP) 产品用途 Product use 进口接中间套鼓形齿式联轴器(WGT)2.jpg

1.WGT接中间套鼓形齿式联轴器是齿式联轴器的改进型，相对于直齿联轴器来说可允许大的角位移，可齿的接触条件，提高传递转矩的能力，延长使用寿命，具有角位移时沿齿宽的接触状态，由齿数相同的内齿圈和带外齿的凸缘半联轴器等零件组成

WGT intermediate sleeve drum type gear coupling is an improved type of gear coupling, which allows for large angular displacement compared to straight tooth couplings, improves tooth contact conditions, improves the ability to transmit torque, extends service life, and has a contact state along the tooth width during angular displacement. It is composed of internal gear rings with the same number of teeth, flange half couplings with external teeth, and other components

2.接中间套鼓形齿式联轴器在工作时，两轴产生相对角位移，内外齿的齿面周期性作轴向相对滑动，必然形成齿面磨损和功率消耗，因此，齿式联轴器需在有良好和密封的状态下工作。齿式联轴器径向尺寸小，承载能力大，常用于低速重载工况条件的轴系传动，并经动平衡的齿式联轴器可用于高速传动

During operation of the intermediate sleeve drum type gear coupling, relative angular displacement occurs between the two shafts, and the tooth surfaces of the inner and outer teeth periodically slide axially relative to each other, inevitably resulting in tooth surface wear and power consumption. Therefore, the gear coupling needs to operate in a good and sealed state. Toothed couplings have small radial dimensions and large load carrying capacity, and are commonly used for shafting transmission under low speed and heavy load conditions. Dynamically balanced tooth couplings can be used for high-speed transmission

基本参数 Basic parameters and dimensions

进口接中间套鼓形齿式联轴器(WGT)结构图.jpg

号	额定转矩 N·m	轴孔直径 d1、d2	轴孔长度L		D	D1	D2	D3	D4	B	B1	H min	C		转动惯量 kg·m²		重量kg
			Y	J1									Ⅰ	Ⅱ	Ⅰ	Ⅱ	Ⅰ	Ⅱ
WGT1	710	12,14	32	—	122	115	98	88	60	58	50	75	30	—	0.008	0.0063	5.66	4.86
		16,18,19	42	—									20	14
		20,22,24	52	—									10	4
		25,28	62	44									3	3
		30,32,35,38	82	60
		40,42	112	84
WGT2	1250	22,24	52	—	150	145	118	108	77	68	52	80	20	4	0.021	0.016	9.78	7.48
		25,28	62	—									10	3
		30,32,35,38	82	60									3
		40,42,45,48, 50,55,56	112	84
WGT3	2500	22,24	52	—	170	165	140	125	90	80	54	80	33	7	0.047	0.033	16.7	12.2
		25,28	62	—									23	3
		30,32,35,38	82	60									3
		40,42,45,48, 50,55,56	112	84
		60,63	142	107
WGT4	4500	30,32,35,38	82	—	200	195	160	145	112	90	58	100	13	3	0.098	0.073	25.6	19.6
		40,42,45,48, 50,55,56	112	84									3
		60,63,65, 70,71,75	142	107
		80	172	132
WGT5	7100	30,32,35,38	82	—	225	215	180	168	128	100	63	100	23	3	0.175	0.126	35	26.1
		40,42,45,48, 50,55,56	112	84									3
		60,63,65, 70,71,75	142	107
		80,85,90	172	132
WGT6	10000	30,32,35,38	82	—	245	230	200	185	145	112	67	100	35	5	0.295	0.213	51.6	38
		40,42,45,48, 50,55,56	112	—									5
		60,63,65, 70,71,75	142	107
		80,85,90,95	172	132
		100	212	167
WGT7	14000	32,35,38	82	—	272	265	230	210	160	122	74	120	45	5	0.53	0.35	68.6	45
		40,42,45,48, 50,55,56	112	—									15
		60,63,65, 70,71,75	142	107									5
		80,85,90,95	172	132
		100,110	212	167
WGT8	20000	55,56	112	—	290	272	245	225	176	136	81	120	29	5	0.71	0.46	79.5	55.8
		60,63,65,70, 71,75	142	107									5
		80,85,90,95	172	132
		100,110, 120,125	212	167

号	额定转矩 N·m	轴孔直径 d1、d2	轴孔长度L		D	D1	D2	D3	D4	B	B1	H min	C		转动惯量 kg·m²		重量kg
			Y	Y									Ⅰ	Ⅱ	Ⅰ	Ⅱ	Ⅰ	Ⅱ
WGT9	25000	65,70,71,75	142	107	315	305	265	245	190	140	88	155	5	5	1.05	0.77	106.5	80.5
		80,85,90,95	172	132
		100,110,120, 125	212	167
		130,140	252	202
WGT 10	40000	75	142	—	355	340	300	280	225	165	98	155	28	5	1.87	1.54	158.8	121.8
		80,85,90,95	172	132									5
		100,110,120, 125	212	167
		130,140,150	252	202
		160	302	242
WGT 11	56000	85,90,95	172	—	412	385	345	325	256	180	112	175	15	8	3.71	2.82	216.6	169.6
		110,110,120, 125	212	167									8
		130,140,150	252	202
		160,170,180	302	242
WGT 12	80000	120,125	212	167	440	435	375	360	288	210	125	205	8	8	6.48	4.84	305.3	245.3
		130,140,150	252	202
		160,170,180	302	242
		190,200	352	282
WGT 13	112000	140,150	252	202	490	480	425	400	320	235	136	205	8	8	10.58	7.9	394.5	313.5
		160,170,180	302	242
		190,200,220	352	282
WGT 14	160000	160,170,180	302	242	545	540	462	440	362	265	158	240	10	10	17.72	13.78	529.5	430.5
		190,200,220	352	282
		240,250,260	410	330
WGT 15	224000	160,170,180	302	242	580	—	488	—	400	280	—	240	10	—	25.25	—	684.5	—
		190,200,220	352	282
		240,250,260	410	330
		280	470	380
WGT 16	280000	180	302	242	650	—	560	—	440	300	—	240	12	—	43.7	—	948.2	—
		190,200,220	352	282
		240,250,260	410	330
		280,300	470	380
WGT 17	355000	200,220	352	282	690	—	600	—	460	325	—	280	12	—	57.37	—	1059	—
		240,250,260	410	330
		280,300,320	470	380
WGT 18	450000	220	352	282	750	—	650	—	510	350	—	280	12	—	59.37	—	1399	—
		240,250,260	410	330
		280,300,320	470	380
		340,360	550	450
WGT 19	560000	240,250,260	410	330	775	—	690	—	535	372	—	350	12	—	110.2	—	1544	—
		280,300,320	470	380
		340,360,380	550	450
WGT 20	710000	260	410	330	825	—	730	—	580	392.5	—	350	14	—	166.1	—	2099	—
		280,300,320	470	380
		340,360,380	550	450
		400	650	540
WGT 21	800000	280,300,320	470	380	925	—	825	—	620	405	—	350	14	—	242.7	—	2482	—
		340,360,380	550	450
		400,420,440	650	540
WGT 22	900000	320	470	380	950	—	850	—	665	410	—	400	14	—	299.2	—	2797	—
		340,360,380	550	450
		400,420,440, 450,460	650	540
WGT 23	1000000	360,380	550	450	1030	—	900	—	710	440	—	400	14	—	388.8	—	3183	—
		400,420,440, 450,460,480, 500	650	540
WGT 24	1250000	380	550	450	1060	—	925	—	730	450	—	400	16	—	482	—	3801	—
		400,420,440, 450,460,480, 500	650	540
		520	800	680

注：

1、质量与转动惯量是按最大轴孔直径的Y型轴孔计算的近似值，未计算中间套 The mass and rotational inertia are approximate values calculated based on the Y-shaped shaft hole with the largest shaft hole diameter, and the intermediate sleeve is not calculated

2、联轴器的许用转速见下页，应按照中间套的长度和重量验算临界转速 The allowable rotational speed of the coupling is shown on the next page, and the critical rotational speed should be checked and calculated based on the length and weight of the intermediate sleeve

联轴器许用转速与中间套的重量、转动惯量 Allowable rotational speed of coupling, weight and rotational inertia of intermediate sleeve

联轴器型号	许用转速 r/min	Hmin mm	重量 kg		转动惯量 kg·m²		中间套每加长10mm的重量kg		中间套每加长10mm的转动惯量 kg·m²
联轴器型号	许用转速 r/min	Hmin mm	Ⅰ	Ⅱ	Ⅰ	Ⅱ	Ⅰ	Ⅱ	Ⅰ	Ⅱ
WGT1	7500	75	1.58	1.47	0.0032	0.0028	0.088	0.08	0.00011	0.000088
WGT2	6700	80	2.68	2.4	0.082	0.0079	0.13	0.125	0.00022	0.00021
WGT3	6300	80	3.5	3.1	0.015	0.0136	0.16	0.16	0.00041	0.00038
WGT4	5600	100	5.2	5.2	0.032	0.031	0.2	0.19	0.0008	0.00071
WGT5	5300	100	6	5.8	0.048	0.042	0.23	0.22	0.0012	0.001
WGT6	5000	100	6.6	6.1	0.061	0.053	0.26	0.24	0.0017	0.0013
WGT7	4500	120	10.5	8.6	0.134	0.105	0.32	0.3	0.003	0.0027
WGT8	4250	120	11.5	9	0.164	0.117	0.32	0.3	0.003	0.0043
WGT9	4000	155	15.7	13.8	0.25	0.209	0.42	0.4	0.0045	0.006
WGT10	3500	155	22.2	15.3	0.46	0.294	0.46	0.45	0.0064	0.009
WGT11	3000	175	28.5	20.9	0.82	0.53	0.52	0.5	0.0091	0.014
WGT12	2800	205	37.3	30.8	1.21	0.81	0.71	0.7	0.015	0.023
WGT13	2500	205	46.4	39.4	1.94	1.56	0.83	0.8	0.024	0.035
WGT14	2300	240	66.4	52.2	3.49	2.62	0.96	0.95	0.037	—
WGT15	2100	240	73.4	—	4.42	—	1.03	—	0.044	—
WGT16	1900	240	95.1	—	6.88	—	1.5	—	0.072	—
WGT17	1800	280	132.4	—	10.78	—	2.5	—	0.16	—
WGT18	1700	280	158.9	—	15.62	—	2.76	—	0.22	—
WGT19	1600	350	182.4	—	19.3	—	2.96	—	0.27	—
WGT20	1500	350	203.1	—	24.7	—	3.16	—	0.32	—
WGT21	1300	350	261.6	—	38.1	—	4.2	—	0.5	—
WGT22	950	400	304.6	—	47.7	—	4.47	—	0.59	—
WGT23	900	400	391.6	—	70.9	—	5.77	—	0.88	—
WGT24	850	400	412	—	78	—	6.07	—	1.02	—

产品名称：

您的姓名：

联系电话：

具体内容：

验证码：

产品中心

太阳集团城娱8722-主頁|欢迎您!

接中间套鼓形齿式联轴器(WGT)