进口衬氟球阀(耐酸碱，防腐蚀球阀性能描述 Performance description

衬氟球阀(耐酸碱，防腐蚀球阀)采用氟塑料作为球阀的内衬，带杆球体结构，独特的弹性唇式密封阀座，采用燕尾槽耐负压、高真空，填料函阀体内设计，能在前后大压差和较大温差范围内具有高密封性能和扭矩轻的功能。在各种酸、碱、盐类等强腐蚀介质中均能很好地应用 RETZ Fluorine lined ball valve (acid and alkali resistant, anti-corrosion ball valve) uses fluorine plastic as the lining of the ball valve, with a rod ball structure, a unique elastic lip seal valve seat, a dovetail groove anti negative pressure, high vacuum, stuffing box valve body design, which can have high sealing performance and light torque within the range of large pressure difference and large temperature difference. It can be well used in various acid, alkali, salt and other strong corrosive media

技术规范 Technical specifications

压力温度曲线 Pressure temperature curve

流量特性图 Flow characteristic diagram

进口衬氟球阀(耐酸碱，防腐蚀球阀产品特性 Product characteristics

固定手柄设计 Fixed handle design

手柄座与操作杆采用分体和固定结构，根据使用可调整操作杆长度再加上操作杆固定设计防止脱落及结构美观。手柄座与定位采用整体铸造成型设计，摆脱传统的分体设计，便于安装和调整定位 retz品牌 The handle base and the operating rod adopt a split and fixed structure. The length of the operating rod can be adjusted according to the use and the fixed design of the operating rod can prevent falling off and the structure is beautiful. The handle seat and positioning are designed by integral casting, which is free from the traditional split design and convenient for installation, adjustment and positioning

扭矩轻便于开关 Torque is lighter than switch

密封副结构采用中线密封，使左右两边的密封力均匀，摆脱了传统的设计结构、避免了受力点全部作用在阀体上，球密封时不发生左右位移，从而减轻扭矩

The structure of the sealing pair adopts the central line sealing, which makes the sealing force on the left and right sides even. It breaks away from the traditional design structure and avoids all force points acting on the valve body. When the ball is sealed, there is no left and right displacement, thus reducing the torque

承受管道介质正负压 Bearing positive and negative pressure of pipeline medium

金属阀门内腔加工燕尾槽，增强阀体与氟塑料的附着力，确保阀门在微负压和全真空的工况下使用

The dovetail groove is processed in the inner cavity of the metal valve to enhance the adhesion between the valve body and fluoroplastics, and ensure that the valve is used under the working conditions of micro negative pressure and full vacuum

阀体本体采用填料函设计 替代之前的分体结构，减少泄露点

The valve body adopts stuffing box design to replace the previous split structure, reducing the leakage point

主要零部件材料 Main parts and materials