功能介绍 Function introduction

可设定启闭时间段独立控制（比如开启10分钟，关闭60分钟，一直循环）The opening and closing time can be set for independent control (such as opening for 10 minutes, closing for 60 minutes, and cycling all the time)

A、可设定开和关时间长短，不具有时钟性质，阀门按照设定的时长周期循环执行开和关 The length of opening and closing time can be set, without clock nature, and the valve can be opened and closed according to the set long cycle

B、可设定：1分钟~999小时59分和15秒~999分钟59秒两种时间范围 Can be set: 1 minute to 999 hours and 59 minutes and 15 seconds to 999 minutes and 59 seconds

基本参数 Basic parameters

规格尺寸Specification and size：1/2～2"

塑料球阀阀体为PPO或"UPVC"材料，金属球阀阀体为316不锈钢材质，采用浮动球直通结构 The plastic ball valve body is made of PPO or "UPVC" material, the metal ball valve body is made of 316 stainless steel, and the floating ball straight-through structure is adopted

塑料阀体：工作温度0-60℃，工作压力0-1MPa，EPDM和FFKM橡胶密封材质可选 Plastic valve body: working temperature 0-60 ℃, working pressure 0-1MPa, EPDM and FFKM rubber sealing materials optional

金属阀体：工作温度0~120℃、工作压力0~1.6MPa，EPDM和FFKM橡胶密封材质可选，其中FFKM橡胶密封材质工作温度0-200℃  Metal valve body: working temperature 0~120 ℃, working pressure 0~1.6MPa, EPDM and FFKM rubber sealing materials are optional, of which the working temperature of FFKM rubber sealing material is 0-200 ℃

控制接线图 Control wiring diagram

1、在设定开的时间段，电动球阀打开 The electric ball valve opens within the set opening time

2、在设定关的时间段，电动球阀关闭 The electric ball valve is closed within the set closing time

适用于DC12V或DC24V球阀。时间段控制/可设定范围：1分钟~999小时59分和15秒~999分钟59秒两种时间范围，球阀按照设定的时长周期循环执行开和关。

Applicable to DC12V or DC24V ball valve. Time period control/settable range: 1 minute to 999 hours and 59 minutes and 15 seconds to 999 minutes and 59 seconds. The ball valve is opened and closed according to the set long cycle

性能特点 Performance characteristics

耐久用，轻扭矩，硬密封，耐腐蚀 Durable, light torque, hard sealing, corrosion resistance

氧化铝陶瓷芯特点Alumina ceramic core features

陶瓷球芯经1680℃超高温烧结而成 The ceramic ball core is sintered at 1680℃

采用刚玉陶瓷，ALO含量≥95%  Adopt corundum ceramics, Al Ogcontent ≥95%

陶瓷球硬度HRA≥85° Ceramic ball hardness HRA≥85°

耐酸碱性∶常温下对各种无机酸、碱稳定 Acid and alkali resistance: stable to various inorganic acids and alkalis at room temperature

碳化硅阀芯特点Silicon carbide core features

质量轻、高硬度、耐磨损：碳化硅球芯经2200℃以上超高温烧结而成，硬度≥HRA90  Light weight, high hardness and wear resistance: silicon carbide ball core is sintered at super high temperature above 2200 ℃, hardness ≥ HRA90

耐高温：在1500℃的高温环境下也不会反应◎化学稳定性好，耐酸碱腐蚀性优良在HF酸或5mol/L HNO3中依然保持稳定  High temperature resistance: it will not react under the high temperature environment of 1500 ℃ ◎ Good chemical stability, good acid and alkali corrosion resistance, stable in HF acid or 5mol/L HNO3

具有优异的导热性，热膨胀性低：在急冷急热的环境下不易崩裂 It has excellent thermal conductivity and low thermal expansion: it is not easy to crack in a hot and cold environment

低摩擦系数：具有优良的干润滑性，启闭更轻松 Low friction coefficient: excellent dry lubrication, easier to open and close

产品结构 Product mix

① 直流/交流减速电机（DC6-24V/AC220V）

② 316L阀杆（根据不同酸碱可选哈式合金钢B或C）

③ 不锈钢316阀体，PPO阀体 

④ 陶瓷球芯（刚玉陶瓷氧化铝）

⑤ PPS耐腐蚀密封片 

⑥ 瓷密封片 

⑦ 开关指示灯

功能介绍 Function introduction

可设定启闭时间段，详述设置锁定/解锁/操作C-01模式/操作C-02模式 The opening and closing time period can be set, and the locking/unlocking/operating C-01 mode/operating C-02 mode can be set in detail

锁定与解锁 Lock and unlock

设置C-01模式 Set C-01 mode

设置C-02模式 Set C-02 mode