首页 > 产品中心 > RETZ瑞茨联轴器 > 进口鼓形齿式联轴器 > 带制动盘齿式联轴器(WGP)

带制动盘齿式联轴器(WGP)

简要描述：RETZ进口带制动盘齿式联轴器(WGP)有一个制动盘，可通过控制制动盘的转速来调节机器的转动速度

品牌：RETZ
工况条件：联接机械
温度/压力：710-160000N.m.
更新时间：2023/03/27

联系我们

产品详情 在线咨询

进口带制动盘齿式联轴器(WGP) 产品用途 Product use 进口带制动盘齿式联轴器(WGP)2.jpg

1.WGP带制动盘鼓形齿式联轴器是齿式联轴器的改进型，相对于直齿联轴器来说可允许大的角位移，可齿的接触条件，提高传递转矩的能力，延长使用寿命，具有角位移时沿齿宽的接触状态，由齿数相同的内齿圈和带外齿的凸缘半联轴器等零件组成。

WGP drum type gear coupling with brake disc is an improved type of gear coupling, which allows large angular displacement compared to straight tooth couplings, improves tooth contact conditions, improves the ability to transmit torque, extends service life, and has a contact state along the tooth width during angular displacement. It is composed of internal gear rings with the same number of teeth, flange half couplings with external teeth, and other components.

2.带制动盘鼓形齿式联轴器在工作时，两轴产生相对角位移，内外齿的齿面周期性作轴向相对滑动，必然形成齿面磨损和功率消耗，因此，齿式联轴器需在有良好和密封的状态下工作。齿式联轴器径向尺寸小，承载能力大，常用于低速重载工况条件的轴系传动，并经动平衡的齿式联轴器可用于高速传动

When working with a drum type gear coupling with brake discs, the two shafts produce relative angular displacement, and the tooth surfaces of the inner and outer teeth periodically slide axially relative to each other, inevitably resulting in tooth surface wear and power consumption. Therefore, the gear coupling needs to operate in a good and sealed state. Toothed couplings have small radial dimensions and large load carrying capacity, and are commonly used for shafting transmission under low speed and heavy load conditions. Dynamically balanced tooth couplings can be used for high-speed transmission

基本参数 Basic parameters and dimensions

进口带制动盘齿式联轴器(WGP)结构图.jpg

型号	额定转矩 N·m	许用转速 rpm	轴孔直径 d1、d2、dz	轴孔长度L		D0	D	D2	D4	B	F	N**	C*	转动惯量 kg·m²	重量kg
				Y	J1、Z1
WGP1	710	4000	12,14	32	—	315	122	98	60	58	30	38	30	0.0078	5.62
			16,18,19	42	—								20
			20,22,24	52	—								10
			25,28	62	44								3
			30,32,35,38	82	60
			40,42	112	84
WGP2	1250	4000	22,24	52	—	315	150	118	77	68	30	38	20	0.022	9.62
			25,28	62	—								10
			30,32,35,38	82	60								3
			40,42,45,48, 50,55,56	112	84
WGP3	2500	3550	22,24	52	—	355	170	140	90	80	30	49	33	0.047	16.6
			25,28	62	—								23
			30,32,35,38	82	60								3
			40,42,45,48, 50,55,56	112	84
			60,63	142	107
WGP4	4500	2500	30,32,35,38	82	—	400 450 500	200	160	112	90	30	45	13	0.098	25.3
			40,42,45,48, 50,55,56	112	84								3
			60,63,65, 70,71,75	142	107
			80	172	132
WGP5	7100	2500	30,32,35,38	82	—	400 450 500	225	180	128	100	30	45	23	0.174	34.7
			40,42,45,48, 50,55,56	112	84								3
			60,63,65, 70,71,75	142	107
			80,85,90	172	132
WGP6	10000	2000	32,35,38	82	—	450 500 560 630	245	200	145	112	30	44	35	0.293	51.3
			40,42,45,48, 50,55,56	112	—								5
			60,63,65, 70,71,75	142	107
			80,85,90,95	172	132
			100	212	167

号	额定转矩 N·m	许用转速 rpm	轴孔直径 d1、d2、dz	轴孔长度L		D0	D	D2	D4	B	F	N**	C*	转动惯量 kg·m²	重量kg
				Y	J1、Z1
WGP7	14000	1700	32,35,38	82	—	450 500 560 710	272	230	160	122	30	44	45	0.53	68
			40,42,45,48, 50,55,56	112	—								15
			60,63,65, 70,71,75	142	107								5
			80,85,90,95	172	132
			100,110	212	167
WGP8	20000	1700	55,56	112	—	500 560 630 710	290	245	176	136	30	44	29	0.71	79
			60,63,65,70, 71,75	142	107								5
			80,85,90,95	172	132
			100,110, 120,125	212	167
WGP9	25000	1600	65,70,71,75	142	107	560 630 710 800	315	265	190	140	30	58	5	1.05	106.5
			80,85,90,95	172	132
			100,110,120, 125	212	167
			130,140	252	202
WGP10	40000	1600	75	142	—	630 710 800	355	300	325	165	30	58	28	1.74	159
			80,85,90,95	172	132								5
			100,110,120, 125	212	167
			130,140,150	252	202
			160	302	242
WGP11	56000	1400	85,90,95	172	—	710 800 900	412	345	256	180	40	58	15	3.67	215
			110,110,120, 125	212	167								8
			130,140,150	252	202
			160,170,180	302	242
WGP12	80000	1400	120,125	212	167	710 800 900	440	375	288	207	40	58	8	6.4	303
			130,140,150	252	202
			160,170,180	302	242
			190,200	352	282
WGP13	112000	1400	140,150	252	202	800 900	490	425	320	325	50	58	8	10.45	291
			160,170,180	302	242
			190,200,220	352	282
WGP14	160000	1200	160,170,180	302	242	900 1000	545	462	362	265	50	65	10	17.48	523
			190,200,220	352	282
			240,250,260	410	330

注：

重量、转动惯量是按最大轴孔直径Y型孔计算的近似值，未计算制动盘 The weight and moment of inertia are approximate values calculated based on the maximum shaft hole diameter, Y-shaped hole, and the brake disc is not calculated

“*”不同制动盘直径的C、C1、C2值为表中数值再加K/2 "*" The values of C, C1, and C2 for different brake disc diameters are the values in the table plus K/2

“**”N=S-K/2表中数值为D0最大时的计算值，S、K见下表 "* *" N=S-K/2 is the calculated value when the value in the table is D0 maximum. See the following table for S and K

制动盘直径D	T	K	S	D5_MAX		重量kg		转动惯量 kg·m²
制动盘直径D	T	K	S	Ⅰ	Ⅱ	Ⅰ	Ⅱ	Ⅰ	Ⅱ
315	15	10	42	180	155	8.5	6.7	0.116	0.11
355	15	10	54	200	175	11.4	9.9	0.192	0.178
400	15	14	54	255	230	15.2	12.4	0.32	0.287
450	15	16	54	305	280	19.7	15.6	0.55	0.462
500	15	18	54	325	295	25	20	0.83	0.712
560	15	18	54	350	320	30.7	25.6	1.28	1.127
630	15	20	54	400	360	38.8	33	2.06	1.826
710	15	20	54	480	450	46.5	39.4	3.32	2.912
800	15	24	70	540	500	67.8	52.7	5.87	4.81
900	15	24	70	600	560	86.6	70.3	9.3	7.852
1000	20	30	80	620	560	128.8	115.1	17.4	15.65

产品名称：

您的姓名：

联系电话：

具体内容：

验证码：

产品中心

太阳集团城娱8722-主頁|欢迎您!

带制动盘齿式联轴器(WGP)