弹性套柱销联轴器
简要描述：RETZ进口弹性套柱销联轴器结构简单，安装方便，更换弹性套容易，尺寸小，重量轻，适应正反转多变，起动频繁的场合
品牌：RETZ- 工况条件：联接机械
- 温度/压力：4-15680N.m.
- 更新时间：2023/03/23
进口弹性套柱销联轴器 产品用途 Product use
1.广泛用于载荷不大，由电动机驱动的各种中、小功率传动轴系中，如减速机、起重机、压缩机、输送机、纺织机、卷扬机、球磨机 Widely used in various medium and small power transmission shafting systems driven by electric motors with small loads, such as speed reducers, cranes, compressors, conveyors, textile machines, hoists, and ball mills
2.如若安装调整后能保持两轴相对位移量在规定的范围内，则联轴器会有满意的使用性能和较长的工作寿命 If the relative displacement of the two shafts can be maintained within the specified range after installation and adjustment, the coupling will have satisfactory service performance and long working life
3.安装维修方便，适应正反转多变，起动频繁的场合 Convenient maintenance, suitable for occasions with variable forward and reverse rotation and frequent starting
4.工作温度-20℃-+70℃ Operating temperature - 20 ℃ -+70 ℃
结构特点 Structural features
1.安装底座刚性好、对中精度较高、冲击载荷不 大、对减振要求不高的中小功率水泵等传动 Transmission of medium and small power water pumps with good rigidity of the mounting base, high alignment accuracy, low impact load, and low vibration reduction requirements
2.有一定的补偿两轴之间的相对位移量和减震性能 There is a certain compensation for the relative displacement between the two shafts and the damping performance
3.结构简单，安装方便，更换弹性套容易，尺寸小，重量轻 Simple structure, convenient installation, easy replacement of elastic sleeve, small size, light weight
基本参数 Basic parameters and dimensions
型号 | 许用转矩 | 许用转速 | D | D1 | d1 | L | C | n-M | 重量 |
FCL90 | 4 | 4000 | 90 | 35.5 | 11 | 28 | 3 | 4-M8×50 | 1.7 |
FCL100 | 10 | 4000 | 100 | 40 | 11 | 35.5 | 3 | 4-M10×56 | 2.3 |
FCL112 | 16 | 4000 | 112 | 45 | 13 | 40 | 3 | 4-M10×56 | 2.8 |
FCL125 | 25 | 4000 | 125 | 50 | 13 | 45 | 3 | 4-M12×64 | 4 |
FCL140 | 50 | 4000 | 140 | 63 | 13 | 50 | 3 | 6-M12×64 | 5.4 |
FCL160 | 110 | 4000 | 160 | 80 | 15 | 56 | 3 | 8-M12×64 | 8 |
FCL180 | 157 | 3500 | 180 | 90 | 15 | 63 | 3 | 8-M12×64 | 10.5 |
FCL200 | 245 | 3200 | 200 | 100 | 21 | 71 | 4 | 8-M20×85 | 16.2 |
FCL224 | 392 | 2850 | 224 | 112 | 21 | 80 | 4 | 8-M20×85 | 21.3 |
FCL220 | 618 | 2550 | 250 | 125 | 25 | 90 | 4 | 8-M24×110 | 31.6 |
FCL280 | 980 | 2300 | 280 | 140 | 34 | 100 | 4 | 8-M24×116 | 44 |
FCL315 | 1568 | 2050 | 315 | 160 | 41 | 112 | 4 | 10-M24×116 | 57.7 |
FCL355 | 2450 | 1800 | 355 | 180 | 60 | 125 | 5 | 8-M30×50 | 89.5 |
FCL400 | 3920 | 1600 | 400 | 200 | 60 | 125 | 5 | 10-M30×150 | 113 |
FCL450 | 6174 | 1400 | 450 | 224 | 65 | 140 | 5 | 12-M30×150 | 145 |
FCL560 | 9800 | 1150 | 560 | 250 | 85 | 160 | 5 | 14-M30×150 | 229 |
FCL630 | 15680 | 1000 | 630 | 280 | 95 | 180 | 5 | 18-M30×150 | 296 |
注：必须在容许值的范围内使用该联轴器 Note: The coupling must be used within the allowable range
在线客服